Repair Clean Fiberglass
Fiberglass Boat Repairs
Cracks or chips in a fiberglass boat hull can be very expensive to have professionally repaired. Depending on the damage to the boat, and the owner's personal fortitude, a do-it-yourselfer can produce professional results without the professional price.
The filler product being used is key to a successful repair. It is important to select a filler that is extremely strong and fast-working. The filler must be flexible. It must not absorb moisture, and it must not shrink. For the do-it-yourselfer, it is best to also choose a filler that does not clog the sandpaper and one that does not require additional polyester coatings.
Once the proper filler has been selected, the next steps are proper preparation and application. Although each filler brand will have specific preparation/application procedures, this article covers the general aspects thereof.
The area to be repaired must be clean, dry and rough. If a crack is being repaired, make a "V" incision over the area to be repaired. This incision provides some depth and volume in which the filler can properly bond. Follow the brand-specific directions for mixing the filler being used. Apply the filler generously in layers over the area being repaired.
When the area has been properly filled, wait the recommended length of time for the filler to properly set up. Sand the area smooth and you should have a nice repair. The repaired area is now ready for painting. Please make sure you understand the requirements for painting over the filler you choose. Some fillers require special additional polyester fillers or putty to be applied over the filler. Other fillers are ready to prime and paint without additional product applications.
Fiberglass boat repairs can be very easy to do, and can save the do-it-yourselfer a lot of money...give it a try.
About the Author
About the author: Jim Stapert is a classic car enthusiast, who enjoys learning by doing. He is an author, a project manager, and a chemical representative. Obtain more information about fiberglass filler at: www.Parasolinc.com
US $11.79
|
|
... |
|
|
B Weld 8265S Weld Compound - Epoxy Twin Pack $3.59 J-B Weld is a remarkably easy, convenient and inexpensive alternative to welding, soldering and brazing. J-B Weld will bond to virtually any clean, dry surface including: iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, concrete, fiberglass, wood, some plastics, and many more. Before it sets, you can clean up with soap and water.... |
|
|
Novus Polish Kit, Plastic Polish & Scratch Remover $10.88 #1 - Gently cleans all plastics without scratching. Leaves a lustrous shine that resists fogging, repels dust, and eliminates static. #2 - Removes fine scratches haziness and abrasions from most plastics. Restores faded and discolored plastics. #3 - Removes heavy scratches and abrasions from most acrylic surfaces. Use when damage is too severe to be restored with NOVUS #2 polish. Not recomme... |
|
|
... |
|
|
... |
|
|
Non-slip Spray for Slippery Fiberglass Acrylic Bathtub or Shower $22.95 The ONLY non-slip clear spray for Fiberglass found on the market! This product comes in an easy to apply aerosol can. Longlasting and Slip-Resistant Epoxy Coating. Can be used in bathtubs, showers, boats, stairs, etc. Will work on virtually any surface. Each can covers up to 15 Sq Ft. Can be used indoors or outdoors.... |
|
|
Homax 720773 Tub & Sink Brush-On One-Part Epoxy, 26-Ounce White $24.25 26 OZ, White, Tough As Tile Tub & Tile Brush-On Epoxy Finish, Long Lasting Epoxy Paint, Withstands Hot Water, Affordable Restoration, Easy 3-Step Process, High Gloss Porcelain Like Finish, Illustrated Step-By-Step Instructions Enclosed, Tough As Tile Provides A Hard, Protective Finish That Remains Beautiful For Years, Even On Surfaces Subject To Severe & Frequent Washing, Use On Bathtubs, Sinks, C... |
|
|
3M Caulk Remover $4.32 Softens caulk for easy removal and prepares surface for new caulk. Works on all types of caulk both indoor and outdoor. Cleans up with water. Packaged in 1/2 pint bottle.... |
|
|
Homax 2275 16-Ounce Oops Remover $6.49 Oops! Painter's Choice 16oz.... |
|
|
T.R. Industries GG1 Gel Gloss Miscellaneous Bath Accessory $4.79 The cleaner made at the request of manufacturers of fiberglass products and cultured marble vanities. It contains non-harmful abrasive cleaning agents that remove surface oxidation and light scratches, while leaving behind a protective carnauba wax coating. Cleans, protects and restores luster while providing a long lasting protective finish. It can also be used on acrylics, corian, porcelain, cer... |
